Xiamen Goldenbridge Imp. & Exp. Co., Ltd.  

Product Name: Full Body Safety Harness with 4 Adjustable Point & Safety Rope Model NO.: DHQS026A Color: >23kn Strength: ?23kN Fixed Mode: Four-point Safety Belts, Safety Ropes Length/Meter: 5~10 Certification: CE, ISO, EN355, EN361 Safety Ropes Material: Polyamide Ester Safety Belts Material: Polyester Type: High Operating Safety Belts Certificate: Ce&ANSI&ISO Applicate: Construction,High Operating Work Webbing Width: 45mm H.S Code: 63072000 Brand: GB,Opt Package: Bag and Carton metallic Fittings: Alloy Steel,Chromed Plated Trademark: GB, OPT Transport Package: Bag, Color Box Specification: CE Origin: Zhejiang, China HS Code: 63072000 Product Description Full body Safety Harness With 4 Adjustable Point & Safety RopeGB company is an experienced manufacture and exporter of safety harness/belt.We've passed the European Union safe authentications such as CE/EN361, EN354, EN355 and EN362, also we strictly follow America ANSI standard.Item NO.DesprictionPackingDHQS026A1)Webbing width:50MM,Material: Polyester Color: Yellow2)1 rear attachment point with 4 adjustable point3)with PE dorsal gasket, 4)safety rope diameter:13MM length:150CMForged snap hook: large size (or stamping snap hook: middle size)5)safety hard ware: chrome plated.10PCS/CTN21/20KGS60*28*45CMOther Types:How to put on the safety belt:1.Take the harness out from the packing, holding it by the dorsal tightening ring.2.Wear the harness by slipping on the shoulder straps one after one, taking care not twist them.Adjust them by pulling or releasing the slack end, so that the buttock strap is firmly in place under the buttocks.Pull one and the other thigh strap through the crotch and latch each strap.Make sure not to cross the straps.3.Attach the chest strap and adjust its tension to hold the shoulder straps centered on each shoulder.Check that the belts would not be wrapped up themselves.4.Adjust the harness by pulling and releasing the free end of the belt, so that the belts would be well tight and at the same time would not prevent free movements.5.The adjustment should be effected by checking that the dorsal ring would be positioned between the shoulder blades or frontal tightening connector would be positioned at the height of the breastbone and that the sitting belt would be correctly positioned.6.For the frontal tightening, the connector of the two back eyes should be in compliance with the norm en362, always connected to both eyes and locked.It is always recommended its use, even if you are using the dorsal tightening ring.Welcometocontactusanytimeifyouhaveanyquestions!Tel.:+865925780864Fax:+865925598316Harness is put on correctly if:* all straps are correctly adjusted (neither too loose nor too tight).* back attaching buckle is correctly positioned at the level of the shoulder blades.* front chest strap is correctly positioned at the middle of the chest.* the ends of all the straps must be kept by plastic loops.